DMX TwinPOE AP RDM
Skip to main content

DMX TwinPOE AP RDM

Product information "DMX TwinPOE AP RDM"

kategorie-head.png DMX TwinPOE AP RDM


The DMX TwinPOE AP RDM is a compact ethernet interface (DMX via Ethernet),
which can be used for Art-Net™/TPM2/sACN to DMX/RDM or DMX to Art-Net™.

Two galvanically separated DMX Universes
The DMX TwinPOE AP RDM offers two separated DMX connections which can be used as DMX-OUT or DMX-IN.

Settable DMX frame rate
In the DMX-OUTPUT mode the DMX frame rate is adjustable, so this interface is compatible to "slow" DMX devices.

RDM via Art-Net™
Supports RDM via Art-Net™ and thus enables connected RDM devices
to be configured via Art-Net™ using corresponding software.

Multi-color LED display
The LED-Display at the DMX TwinPOE AP RDM can be switched off via Art-Net™-Command (AcLedMute)
or time controlled. This is very helpful to avoid disturbing “light points” on stage.

LSA-PLUS Quick connection technology
The LSA insulation displacement technology allows the individual wires to be
attached quickly (e.g. for network installation cables).

Easy Configuration
A user-friendly configuration via web browser allows a fast and uncomplicated setting
of all parameters. No special software is necessary, a standard web browser is enough.
So, the configuration is possible any time from PC, Smartphone or tablet.
Compact design
The DMX TwinPOE AP RDM with a size of 66mm x 66mm is suitable for
installation in the optionally available wall-mounted housing.

Art-Net™ Merge-Function
Two Art-Net™ sources are output by LTP (Latest) or HTP (Highest) combined to the DMX output.

Firmware-Update-Function
To be able to use future functions, DMX TwinPOE AP RDM offers a firmware update function.
This can be started from the web browser, so no access to the device is necessary!

DMX4ALL communication interface
The DMX TwinPOE AP RDM has an additional communication interface that uses DMX4ALL commands via TCP or UDP.

Surface housing available
A surface-mounted housing suitable for the DMX TwinPOE AP RDM is available as an accessory.


made-in-germany.png


artnet-logo-black.png Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd.


kategorie-head.png Specifications
  
Power supply:PoE with IEEE 802.af
 or 8-48V DC
 (200mA@12V; 110mA@24V; 65mA@48V)
  
Connection:Ethernet: LSA-PLUS connection
 Power: Screw terminals
 DMX: Pin header RM2,54
  
DMX:adjustable each DMX connection:
 - 512 channels OUT
 - 512 channels IN
  
DMX-Framerate:adjustable (5 - 44 fps)
  
RDMRDM via Art-Net™ on-/off switchable
  
DATA FAIL (DMX-OUT):HOLD last data
 CLEAR all to 0%
 SET all to 100%
 NO OUTPUT
 DEFAULT VALUES
 INTERNAL PROGRAM
  
DMX-IN FAIL (DMX-IN):NO DATA
 HOLD last data
 CLEAR all to 0%
 SET all to 100%
  
Protocol:Art-Net™
 TPM2
 sACN (Unicast)
 DMX4ALL commands
  
Internal program:User configurable Stand-Alone program
  
LED-Display:Multi-Color-LED (RGB)
  
Dimensions:66mm x 66mm


kategorie-head.png Product Downloads
kategorie-head.png Software & Tools
Manufacturer "DMX4ALL GmbH"
Wir bieten
professional space with a human face

Die DMX4ALL GmbH ist ein Ingenieurbüro mit dem Produktschwerpunkt der Licht- und Steuerungs- technik basierend auf dem ARTNET,DMX512 und RDM Protokoll. Der Familienbetrieb entwickelt und produziert seit 2004 elektronische Schaltungen für Clubs, Bühne und Beleuchtung. Die Produktpalette ist mit den Bedürfnissen der Kunden gewachsen und reicht heute vom einfachen DMX-Dekoder über verschiedene Abspieler und ArtNet PoE Interfaces bis hin zu modernen LED-Dimmern Stepper und innovativen LED Pixel-Kontrollern.
Related links of the manufacturer

We recommend the following for this product:

Installation housing Spelsberg TK PS 99-6-m
<table width="800" cellspacing="1" cellpadding="1">  <tr>    <td><img src="https://www.media.dmx4all.store/images/kategorie-head.png" align="absmiddle"><span style="font-size: large;"><strong>&nbsp;Installations-Gehäuse 94x94x57 Spelsberg TK PS 99-6-m</strong></span></td>  </tr></table><br>The TK - PS series has a high protection rating of IP 66, can be sealed as standard and is available with smooth side walls or with metric knockouts. No subsequent drilling or milling is required - simply knock out the knockouts with a screwdriver and install the screw connections. The material is very easy to work with for individual openings in smooth side walls. The housings are scratch-resistant. They are characterized by a high level of flexibility, e.g. through the range of accessories and the many fastening options inside the box, the adapted standard rails and the mounting plates. The lids are available in either gray or transparent. The wall fastening options in the box base and below the lid screws round off the wide range of possible uses.<br><br><br><!-- Specifications --><table width="800" cellspacing="1" cellpadding="1">  <tr>    <td><img src="https://www.media.dmx4all.store/images/kategorie-head.png" border="0" align="absmiddle"><span style="font-size: large;"><strong>&nbsp;Specifications</strong></span></td>  </tr></table><table border="0" cellspacing="1" cellpadding="1">  <tr>    <td width="300">&nbsp;</td>    <td width="500">&nbsp;</td>  </tr>  <tr>    <td>Specifications:</td>    <td>With pre-stamping 7x M16/20</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>Material:</td>    <td>Polystyrol (EPS)</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>Length:</td>    <td>94 mm</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>Width:</td>    <td>94 mm</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>Hight:</td>    <td>57 mm</td>  </tr></table><br>
Product number: 50-0030

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€12.39*
LSA Auflegewerkzeug - LogiLink
 LSA Auflegewerkzeug - LogiLinkIdeal suitable for on-wall and in-wall wallplates.Cutting of the extending cable end in one step and easy network wiring.- LSA Punch Down Tool- Suitable for on-wall and in-wall wallplates- Cutting of the extending cable end in one step- According to the standard EIA/TIA 568 B- For Network, DSL and ISDN- Easy to use- With self-tapping contacts
Product number: 49-0000

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€5.99*

You might also be interested in:

DMX-RELAIS 2 INRUSH
 DMX-RELAIS 2 INRUSHThe DMX-RELAIS 2 INRUSH is designed for several control tasks.Two potential free switching outputs2 potential free switching outputs (closer / NO)up to 8A switching capacity are available.Switching contact for direct and alternating voltageThe INRUSH version is suitable for control direct or alternating voltage.For voltages from 12V up to 24VThe DMX-Relais 2 INRUSH works with supply voltages from 12V up to 24V DC.DMX FAIL-FunctionAn adjustable DMX FAIL function offers the option to holdthe current state (HOLD) or to adopt a predefined value if the DMX signal fails.RDM supportThe DMX-Relais 2 INRUSH allows the configuration via RDM or DMX.Several operating modesThe DMX-Relais 2 INRUSH offers several operating modes which can be set via jumper or RDM.Top hat rail mounting availableSuitable for the DMX-Relais 2 INRUSH the DIN rail housing 700 is available as accessory. Specifications  Power supply:12-24V DC 150mA@12V / 100mA@24V  Protocol:DMX512 RDM  DMX channels:1 or 2 channels  Output:2 switching contacts (165A/20ms Switch-on peak current) DC: max. 8A/250V~ (resistive loads) DC: According to the max. DC load graph  DMX-FAIL:Hold / 0-100%  Operation modes:Hysteresis 127/128 Hysteresis 0/1 Hysteresis 100/150 Exclusive Monostable 1Second FogControl  Connectors:screw terminals  Dimensions:64,2mm x 82mm Product DownloadsDMX-RELAIS 2 INRUSHBedienungsanleitung DMX-RELAIS 2 INRUSHUser Manual
Product number: 90-2002

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€70.58*
DMX-Relais/Analog 1
 DMX-Relais/Analog 1The DMX Relais/Analog 1 is designed for several kinds of controlling tasks.Potential free switch outputOne potential free switch output (normally open / NO) with up to 8A switching capacity is available.Switching contact for direct and alternating voltageThe switching contact is suitable for switching both direct voltage and alternating voltage.Analog control outputOne control output with 0-10V or 1-10V are available for control devices with analog input.For voltages from 12V up to 24VThe DMX Relais/Analog Interface 1 runs with supply voltages from 12 up to 24V direct voltage.DMX FAIL-FunctionAn adjustable DMX FAIL-Function offers the option to hold the current state (HOLD) or to adopt a predefined value if the DMX signal fails.RDM supportThe DMX Relais/Analog Interface 1 the configuration via RDM or DMX.Several operating modesThe DMX Relais/Analog Interface 1 offers several operating modes which can be set via jumper or RDM:- Relay + Analog 8Bit 0-10V- Relay + Analog 8Bit 1-10V- Relay + Analog 10Bit 0-10V- Relay + Analog 10Bit 1-10V- Relay & Analog 8Bit 0-10V- Relay & Analog 8Bit 1-10V- Relay & Analog 10Bit 0-10- Relay & Analog 10Bit 1-10VTop hat rail mounting availableSuitable for the DMX Relais/Analog Interface 1 the DIN rail housing 350 is available as accessory. Specifications  Power supply:12-24V DC 100mA@12V / 70mA@24V  Protocol:DMX512 / RDM  DMX channels:1 or 2 channels  Output:1 switching contact NO max. 8A / 250V~ (165A@20ms Switch-on peak current) 1x analog output 0-10V / 1-10V  DMX-FAIL:Hold / 0-100%  Connectors:screw terminals  Dimensions:29,2mm x 82mm Product DownloadsDMX-Relais/Analog 1Bedienungsanleitung DMX-Relais/Analog 1User Manual
Product number: 90-5241

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€83.82*
DMX-Splitter 4 RDM
 DMX-Splitter 4 RDMThe DMX-Splitter 4 RDM is a compact DMX and RDM distributor that makes a DMX input signalavailable again at four galvanically isolated outputs.4 galvanically isolated outputsThe DMX-Splitter 4 RDM is a compact DMX and RDM distributor that makes a DMX input signalavailable again at four galvanically isolated outputs.DMX and RDMIn contrast to pure DMX splitters, the RDM information is passed in bothdirections in addition to the DMX signal.RDM filterWhen the RDM filter is switched on, all RDM information are filtered out and no longer passedon to the outputs. This can prevent malfunction / flickering of non-RDM-capable devices.Settings possible via RDMThe DMX-Splitter 4 RDM is recognized as an independent RDM device and settings can be made via RDM.Extremely light constructionExtremely light DC/DC converters are used for galvanic isolation.Power supply via one power supply unitThe power supply occurs via one power supply unit. The voltage range is between 8V up to 24V.RGB-LED-DisplayThree RGB LEDs clearly indicate the current operating status.Top hat rail mounting availableSuitable for the DMX-Splitter 4 RDM the DIN rail housing 700 is available as accessory. Specifications  Power supply:8-24V DC  Power consumption:200mA@12V / 130mA@24V (no load)  Protocol:DMX512 RDM  Output:4x DMX512 / RDM galvanically isolated  RDM filter:Can be switched on / off  Connections:screw terminals  Dimensions:64,2mm x 82mm Product DownloadsDMX-Splitter 4 RDMBedienungsanleitung DMX-Splitter 4 RDMUser Manual
Product number: 90-0824

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€154.70*

Tools & Equipment:

WAGO 221-2411 Through Connector
 WAGO 221-2411 DurchgangsverbinderWith the 221 series connection terminal, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The connection terminals can be opened particularly easily and quickly.Thanks to the specially designed operating lever, only minimal effort is required to open the 221.The connection is made completely without tools.In addition, the recessed grips on the side prevent slipping and ensure that the terminal is easy to hold while connecting the conductors.With the small connection terminal up to 4 mm², all types of conductors with different cross-sections can be clamped quickly and easily.The 1-way through connectors connect fine-stranded conductors from 0.14 to 4 mm² as well as single and multi-wire conductors from 0.2 to 4 mm².The large connection area allows you to connect different types of conductors and bridge large differences in cross-section. Specifications  Number of poles:1  Rated current:32A  Cross section flexible (max.):4 mm²  Cross section flexible (min.):0.14 mm²  Cross section rigid (max.):4 mm²  Cross section rigid (max.):0.2 mm²  Part number:221-2411  Manufactor:WAGO
Product number: 00-0690

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€0.60*
WAGO 221-412 Connection Terminal 2
 WAGO 221-412 Verbindungsklemme 2With the 221 series connection terminal, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The connection terminals can be opened particularly easily and quickly.Thanks to the specially designed operating lever, only minimal effort is required to open the 221.The connection is made completely without tools.In addition, the recessed grips on the side prevent slipping and ensure that the terminal is easy to hold while connecting the conductors.With the small connection terminal up to 4 mm², all types of conductors with different cross-sections can be clamped quickly and easily.The connectors connect fine-stranded conductors from 0.14 to 4 mm² as well as single and multi-wire conductors from 0.2 to 4 mm².The large connection area allows you to connect different types of conductors and bridge large differences in cross-section. Specifications  Type:Connection terminal  Assembly:2 conductors  Rated current:32A  Cross section flexible (max.):4 mm²  Cross section flexible (min.):0.14 mm²  Cross section rigid (max.):4 mm²  Cross section rigid (max.):0.2 mm²  Part number:221-412  Manufactor:WAGO
Product number: 00-0691

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€0.89*
WAGO 221-412 Connection Terminal 3
 WAGO 221-413 Verbindungsklemme 3With the 221 series connection terminal, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The connection terminals can be opened particularly easily and quickly.Thanks to the specially designed operating lever, only minimal effort is required to open the 221.The connection is made completely without tools.In addition, the recessed grips on the side prevent slipping and ensure that the terminal is easy to hold while connecting the conductors.With the small connection terminal up to 4 mm², all types of conductors with different cross-sections can be clamped quickly and easily.The connectors connect fine-stranded conductors from 0.14 to 4 mm² as well as single and multi-wire conductors from 0.2 to 4 mm².The large connection area allows you to connect different types of conductors and bridge large differences in cross-section. Specifications  Type:Connection terminal  Assembly:3 conductors  Rated current:32A  Cross section flexible (max.):4 mm²  Cross section flexible (min.):0.14 mm²  Cross section rigid (max.):4 mm²  Cross section rigid (max.):0.2 mm²  Part number:221-413  Manufactor:WAGO
Product number: 00-0692

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€1.37*
WAGO 221-412 Connection Terminal 5
 WAGO 221-415 Verbindungsklemme 5With the 221 series connection terminal, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The connection terminals can be opened particularly easily and quickly.Thanks to the specially designed operating lever, only minimal effort is required to open the 221.The connection is made completely without tools.In addition, the recessed grips on the side prevent slipping and ensure that the terminal is easy to hold while connecting the conductors.With the small connection terminal up to 4 mm², all types of conductors with different cross-sections can be clamped quickly and easily.The connectors connect fine-stranded conductors from 0.14 to 4 mm² as well as single and multi-wire conductors from 0.2 to 4 mm².The large connection area allows you to connect different types of conductors and bridge large differences in cross-section. Specifications  Type:Connection terminal  Assembly:5 conductors  Rated current:32A  Cross section flexible (max.):4 mm²  Cross section flexible (min.):0.14 mm²  Cross section rigid (max.):4 mm²  Cross section rigid (max.):0.2 mm²  Part number:221-415  Manufactor:WAGO
Product number: 00-0693

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€1.67*
WAGO 221-500 Fastening Adapter
 WAGO 221-500 BefestigungsadapterWith the 221 series, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The mounting carrier is suitable for 2-, 3- and 5-conductor 221 Series Splicing Connectors (4 mm²). Specifications  Type:Mounting carrier  Suitable:for 2-, 3- and 5-conductor 221 Series Splicing Connectors  Mounting type:DIN-35 rail Screw mount  Color:Orange  Part number:221-500  Manufactor:WAGO
Product number: 00-0699

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€1.19*

Software:

DMX-Configurator FREE-Version
 DMX-Configurator FREE-VersionThe controlling software DMX-Configurator 4PIXX represents a user friendly surface to create light scenes (programs). Up to 8 DMX-universes can be used which can be represented as pixel-matrix.A live operation with a connected DMX4ALL DMX- or Pixel-Interfaces will be possible as well as an export to DMX4ALL DMX-Player and SD-Card-Player. All in all, in many areas an application will be possible.The FREE-Version is available as download for free and has the following functions.Range of function:1 DMX OUT universeArtNet SupportCue-ListRecord FunctionArtNet Sync RecordingLoop Find FunctionDevice Manager to create LED-Pixel screensPreview for LED-Pixel screensRemote Manager (MIDI / TIMER / DMX)Secutity functions: Password protected programming fileExport/Import of scenesExport/Import of stepsExport for NanoSD Player / ArtNet-Player 4 / DMX-Player S/L/ONELimits of FREE-Version:Multi Interface Support with 16 DMX universes can be used with up to 2 scenesTOUCH-Mode (Time limited)No secutity functionsNo hardware secutity functions ArtNet Player 4  Operating system:Windows® 7, Windows® 8  Software-Updates:Available as download Produkt DownloadsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual Application NotesAufnahme von Art-NetAppNote Importieren von Jinx! SzenenAppNote Aufnahme eines DMX SignalsAppNote
Product number: 70-0122

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€0.00*
DMX-Configurator PRO-Version
 DMX-Configurator PRO-VersionThe controlling software DMX-Configurator represents a user friendly surface to create light scenes (programs). Up to 16 DMX-universes can be used which can be represented as pixel-matrix. A live operationwith a connected DMX4ALL DMX- or Pixel-Interfaces will be possible as well as an export toDMX-Player and SD-Card-Player. All in all, in many areas an application will be possible. The BASIC-Version use a USB-Dongle needing a free USB-slot. The Dongle can be used on several computer and is easy usable for service tasks. Range of functions:16 DMX OUT + 16 DMX-IN universesMulti Interface SupportCuelistArtNet SupportRecord FunctionArtNet Sync RecordingLoop Find FunctionDevice Manager to generate LED-Pixel for lines and screensPreview for LED-Pixel for lines and screensTOUCH-ModeRemote Manager (MIDI / TIMER / DMX)Export/Import of scenesExport/Import of stepsExport for AvengerSD / NanoSD Player / ArtNet-Player 4 / ArtNet MultiPixxPlyer 16 / DMX-Player S/L/ONESecurity functions: Optional password for programming fileHardware secutity functions: Program execution can be limited by using the hardware serial number Important InformationPlease note that the software is excluded from change and return ! ArtNet Player 4  Operating system:Windows® 7, Windows® 8, Windows® 10  PC-connections:USB 1.1 / USB 2.0  Scope of delivery:USB-Dongle with PRO-Licence DMX4ALL lanyard with dongle holder  Software-Updates:Available as download Produkt DownloadsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual DMX-Configurator PRO-VersionUSB Driver Application NotesAufnahme von Art-NetAppNote Importieren von Jinx! SzenenAppNote Aufnahme eines DMX SignalsAppNote
Product number: 70-0123

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€299.00*