DMX Stepper Control
Skip to main content

DMX-Stepper-Control

Product information "DMX-Stepper-Control"

kategorie-head.png DMX-Stepper-Control


The DMX-Stepper-Control is designed for controlling a stepping motor (Stepper) via DMX.
The extensive configuration is done via RDM.

Several operating modes
Several operating modes allow a continuous operation with variable speed or the starting of defined positions. The minimum and maximum step speed as well as the number of steps and number of positions can be set individually.

RDM Support New Feature
The DMX stepper control allows settings via RDM over DMX.

Free RDM-Software
To set the parameters via RDM, our free RDM Configurator software is available as download from our website www.dmx4all.de.

Lockable Device Settings
The RDM parameters Lock Pin and Lock State allow or avoid changings of saved RDM parameters in order to prevent unauthorized changes.

Replaceable stepping motor driver
The standard Pololu A4988 step motor driver is suitable for power supplies from 8-24V and can control a current of 2A per phase.

Alternatively, the stepper motor driver can also be replaced with a SilentStepStick with Trinamic TMC2100 / TMC2208 or, alternatively, an external stepper motor driver can be used with the BRIDGE stepper motor driver.

Micro step operating modes
The following micro step operation modes are supported Full-Step (1/1) / Half-Step (1/2) / Quarter-Step (1/4) / Eighth-Step (1/8) / Sixteenth-Step (1/16)

Left and Right End-Switch
Inputs for a left and right end-switch allow the travel distance to be limited.
These can optionally be deactivated after initialization.

Activate / Deactivate the Step Motor Driver
The stepper motor driver can optionally be activated or deactivated via DMX.

Settable Initialization process
Optionally, initialization can be carried out after switching on. The number of steps left and right as well as step speed can be set for this process. The motor then moves left and right until the end switch is reached and saves this position as the initial point.

Reset per DMX
During operation the initialization process (Reset) can optionally be started via DMX.


made-in-germany.png


kategorie-head.png Specifications
  
Power supply:8-24V DC / 50 mA (without connected stepper)
  
Protocol:DMX512
 RDM
  
DMX channels:1-5 DMX-channels (depending on adjusted mode)
  
Output driver:Pololu A4988 stepper driver (default)
 TMC2100 SilentStepStick (Optional accessory)
 TMC2208 (Optional accessory)
 Bridge for external Stepper Driver (Optional accessory)
  
Stepper-Voltage:8-24V DC (is equal to the power supply voltage)
  
Stepper-Current:max. 2A with Pololu A4988 stepper motor driver
  
Connection:Screw terminals
  
Dimensions:80mm x 39mm



kategorie-head.png Product Downloads
Manufacturer "DMX4ALL GmbH"
Wir bieten
professional space with a human face

Die DMX4ALL GmbH ist ein Ingenieurbüro mit dem Produktschwerpunkt der Licht- und Steuerungs- technik basierend auf dem ARTNET,DMX512 und RDM Protokoll. Der Familienbetrieb entwickelt und produziert seit 2004 elektronische Schaltungen für Clubs, Bühne und Beleuchtung. Die Produktpalette ist mit den Bedürfnissen der Kunden gewachsen und reicht heute vom einfachen DMX-Dekoder über verschiedene Abspieler und ArtNet PoE Interfaces bis hin zu modernen LED-Dimmern Stepper und innovativen LED Pixel-Kontrollern.
Related links of the manufacturer

We recommend the following for this product:

Stepper driver TMC2100 SilentStepStick
 Schrittmotortreiber TMC2100 SilentStepStickTMC SilentStepStick has a configurable microstep resolution from fullstep up to 256 microsteps.To keep it compatible with other firmware made for stepstick or Pololu board it has a configurable interpolation.Can be used together wit our DMX-Stepper-Control. Technische Daten  Motordriver:Trinamic TMC2100  Voltage:8-45 V (Stepper)Voltage:3.3V and 5V (control TTL signals)  Current:1,2A (RMS)   Overheat protection  Microstep Resolution:1...256  Delivery:1x SilentStepStick with preconfigured pin row for DMX-Stepper-Control  
Product number: 00-0609

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€21.42*
Schrittmotortreiber BRIDGE
 Schrittmotortreiber BRIDGEThe stepper motor driver BRIDGE can be used to connect external stepper motor drivers to the DMX-Stepper-Control.The signals STEP, DIR and ENABLE are bridged by the stepper motor driver BRIDGE to the motor connectionand can thus be used for the control of an external stepper motor driver.Can be used together with our DMX-Stepper-Control.For detailed information, please refer to the instructions for the DMX-Stepper-Control. Technische Daten  Motordriver:none (EXTERNAL)  Connection:2x 8 pin row  Dimensions:15,2mm x 20,3mm  Delivery:1x EXTERNAL DRIVER BRIDGE with presoldered pin row Product DownloadsSchrittmotortreiber BRIDGEBedienungsanleitung Schrittmotortreiber BRIDGEUser Manual
Product number: 00-0606

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€5.95*
Stepper NEMA17 12V/1500mA
 Schrittmotor NEMA17 12V/1500mAThis is one of the most popular Nema 17 models.It is with 1.8° step angle (200 steps/revolution).Each phase draws current 1.5A at 12V, allowing for a holding torque of 45Ncm. Technische Daten  Motor Type:Bipolar Stepper  Recommended Voltage:12V  Rated Current/phase:1.5A  Step Angle:1.8°  Holding Torque:45Ncm  Size:42mm x 42mm x 39mm  Shaft Diameter:Φ5mm  Front Shaft Length:20mm
Product number: 11-3001

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€27.33*
Stepper NEMA17 12V/400mA
 Schrittmotor NEMA17 12V/400mAThis is the most popular Nema 17 model.It is with 1.8° step angle (200 steps/revolution).Each phase draws current 0.4A at 12V, allowing for a holding torque of 26Ncm. Technische Daten  Motor Type:Bipolar Stepper  Recommended Voltage:12V  Rated Current/phase:0.4A  Step Angle:1.8°  Holding Torque:26Ncm  Size:42mm x 42mm x 34mm  Shaft Diameter:Φ5mm  Front Shaft Length:20mm
Product number: 11-3000

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€24.62*
Multiconnector 2 pole 3,5mm
 Systemklemme 2polig 3,5mm2 pole 3,5mm plug-in terminal block as replacementWR-TBL Serie 3611 - 3.50 mm Specifications  Number of poles:2  Distance:3,5mm  Serie:WR-TBL 3611 - 3.50 mm  Part number:691 361 100 002  Manufactor:Würth Electronic
Product number: 00-0752

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€0.99*
Multiconnector 3 pole 3,5mm
 Systemklemme 3polig 3,5mm3 pole 3,5mm plug-in terminal block as replacementWR-TBL Serie 3611 - 3.50 mm Specifications  Number of poles:3  Distance:3,5mm  Serie:WR-TBL 3611 - 3.50 mm  Part number:691 361 100 003  Manufactor:Würth Electronic
Product number: 00-0753

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€1.29*
Multiconnector 4 pole 3,5mm
 Systemklemme 4polig 3,5mm4 pole 3,5mm plug-in terminal block as replacementWR-TBL Serie 3611 - 3.50 mm Specifications  Number of poles:4  Distance:3,5mm  Serie:WR-TBL 3611 - 3.50 mm  Part number:691 361 100 004  Manufactor:Würth Electronic
Product number: 00-0754

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€1.49*
HAMMOND 1455D801BK
 HAMMOND 1455D801BKAluminum housing 1455D801BK Specifications  Manufacturer:Hammond  Manufacturer part number:1455D801BK  Dimension (LxWxH):80 mm x 45 mm x 25 mm  Material:Aluminium  Color:black Produkt DownloadsDatasheetUser Manual
Product number: 50-0027

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€23.21*
Stepper driver TMC2208
 Schrittmotortreiber TMC2208The stepper motor driver TMC2208 is compatible with the Pololu A4988.The components are mounted on the top with which a heat sink can be mounted for better heat dissipation.Can be used together with our DMX-Stepper-Control.For detailed information, please refer to the instructions for the DMX-Stepper-Control. Technische Daten  Motordriver:Trinamic TMC2208  Voltage:5,5-36 V (Stepper)Voltage:3.3V and 5V (control TTL signals)  Current:1,2A (RMS)   Overheat protection  Delivery:1x SilentStepStick with presoldered pin row 1x Heatsink  
Product number: 00-0607

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€15.74*

You might also be interested in:

DMX STAGE-PROFI 1.1 RDM
 DMX STAGE-PROFI 1.1 RDM (XLR3)The DMX STAGE-PROFI 1.1 RDM is a compact bidirectional Ethernet Gateway (DMX via Ethernet), whichcan be used for Art-Net™ / TPM2 / USB to DMX / sACN to DMX / RDM or DMX to Art-Net™.Via a standard RJ45 net work connection the connection to ethernet net work occurs.Switchable DMX directionThe DMX direction can be switched according to usage.Settable DMX frame rateIn the DMX-OUTPUT mode the DMX frame rate is adjustable, so this interface is compatible to "slow" DMX devices.RDM via Art-Net™Supports RDM via Art-Net™ and thus enables connected RDM devices to be configured via Art-Net™ using corresponding software.Muteable LED displayThe LED-Display at the DMX STAGE-PROFI 1.1 RDM is disengageable via Art-Net™-Command (AcLedMute)or time controlled. This is very helpful to avoid disturbing “light points” on stage.DHCPThe DMX STAGE-PROFI 1.1 RDM has a DHCP function for automatic addressing in the network.Internal stand-alone programs The internal programs make the DMX STAGE-PROFI 1.1 RDM a stand-alone device. The programs can be calledup via the web interface, when the device is switched on, or when Art-Net™ data is missing.Easy ConfigurationA user-friendly configuration via a web browser allows a fast and uncomplicated setting of all parameters.No special software is required, a normal web browser is sufficient. Thus, the configuration at any timefrom your PC, smartphone or tablet device.DMX-Monitor The DMX monitor is available via the web interface. This means that the current DMX valuescan be displayed and checked simultaneously without any additional software.DMX-Fader The DMX fader is available via the web interface. This allows the DMX values to be output to be set without additional software.Easy Network ConfigurationFor easy setting of the IP-address, we provide the IP Configurator as a PC tool or Android app available for free.This allows you to leave the network settings unchanged and can easily configure the IP.High quality and Compact DesignThe DMX STAGE-PROFI 1.1 RDM is designed with a 3-pin Neutrik-XLR-Connection metal design and cased in an aluminium housing.Art-Net™ Merge-FunctionTwo Art-Net™ sources are output by LTP (Latest) or HTP (Highest) combined to the DMX output.Combinable with WiFi componentsIn combination with a WLAN bridge the DMX STAGE-PROFI 1.1 RDM can also be integrated into WLAN net works.Firmware update functionTo use future functions the DMX STAGE-PROFI 1.1 RDM offers a Firmware-Update-Function.This can be started with any web browser, so no direct access to the device is necessary!DMX4ALL Communication-InterfaceThe DMX STAGE-PROFI 1.1 RDM has an additional communication interface using the DMX4ALL-Commands via TCP or UDP packages. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd. Specifications  Power supply:5V DC via attached external power supply  Connection:RJ45 Ethernet USB Mini-B Neutrik® XLR3  Ethernet:10 Mbit/s | 100 Mbit/s  DMX:Selectable: - 512 channels OUT - 512 channels IN  DMX-Framerate:Adjustable (5 - 44 fps)  RDM:RDM via Art-Net™ (switchable on/off)  ArtDmx Fail:HOLD last data(DMX-OUT)CLEAR all to 0% SET all to 100% NO OUTPUT DEFAULT VALUES SET all to 100% NO OUTPUT DEFAULT VALUES INTERNAL PROGRAMDMX Fail:HOLD last data(DMX-IN)CLEAR all to 0% SET all to 100% NO OUTPUT DEFAULT VALUES  Protocol:Art-Net™ (downwards compatiblel) Ethernet-VCP (Virtual COM Port) USB-VCP (Virtual COM Port) TPM2 sACN (Unicast) DMX4ALL-Commands via TCP, UDP, VCP  Internal program:User-configurable stand-alone program  Status LED:Green: Ethernet Connection Yellow: Datatransfer  Dimensions:75mm x 26mm x 35 mm Produkt DownloadsDMX STAGE-PROFI 1.1 RDM (XLR3)Bedienungsanleitung DMX STAGE-PROFI 1.1 RDM (XLR3)User Manual DMX STAGE-PROFI 1.1 RDM (XLR3)Ethernet VCP Driver 32 & 64bit - Version 1.10 DMX STAGE-PROFI 1.1 RDM (XLR3)USB VCP Driver 32 & 64bit - Version 42.0.1.0 DMX STAGE-PROFI 1.1 RDM (XLR3)Firmware Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual IP Configurator (ArtNet Produkte)Windows 32 & 64bit IP ConfiguratorAnwendungshinweis IP ConfiguratorApplication Note DMX4ALL CommandsDMX4ALL Commands for Third-Party Developers RDM Configurator (ArtNet Produkte)Windows 32 & 64bit RDM ConfiguratorBedienungsanleitung RDM ConfiguratorUser Manual
Product number: 99-0463

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€221.89*
MiniPixx 3.5 RDM
 MiniPixx 3.5 RDMThe MiniPixx 3.5 RDM is the smallest DMX controller for digital LED stripes, which is available in different versions.The individual pixels of the digital LED strip can be controlled in the simplest way via DMX.Different versionsThe MiniPixx RDM is available in 3 different versions. Depending on the LED stripe,a version 3.5 / 4.5 (5V) or 4.12 (12V) is available.170 RGB-, 128 RGBW- or 512 single color pixelBy controlling via DMX, 170 pixels (RGB), 128 pixels (RGBW) or512 pixels (single color) can be controlled individually.RDM SupportThe MiniPixx RDM allows an RDM supported configuration via DMX.Pixel-SequencerWith the pixel sequencer different effects can be generated.Only a few DMX channels are necessary to customize the settings for the effects.Small DesignDue to the small size of only 12mm x 25mm, the MiniPixx RDM can be mounted directly at the beginning of the LED stripe.Selectable LED-ChipThe LED chip used in the connected digital LED strip can be selected. This allows the use with various digital LED stripes.Settable Color ReplayThe color sequence for RGB as well as RGBW LED stripes is adjustable for universal use.SingleColor-OptionVia a DMX universe up to 512 pixels can be controlled in single color.For this, the SingleColor Option must be selected, in which each pixel needs only one channel.Settable Pixel GroupThe MiniPixx RDM supports pixel groups with an adjustable length. Each pixel group behaves like a singlepixel that is controlled via 3 DMX channels (for RGB). This way channels can be saved in longer installations.br>  Specifications  Power supply:5V / 50mA from the connected digital LED stripe  Protocol:DMX512 RDM  Output Protocol:RGB(LED type)APA-104max. 512 Pixel GS8208max. 512 Pixel INK1002 / INK1003max. 512 Pixel LC8808(B)max. 512 Pixel LPD1886 - 8Bitmax. 512 Pixel LPD1886 12Bit (8Bit controlled)max. 341 Pixel LPD1886 12Bit (12Bit controlled)max. 341 Pixel SK6812 / SK6822max. 512 Pixel TLS3008 8Bitmax. 558 Pixel TM1804 / TM1812 / TM1829max. 512 Pixel UCS1903 / UCS1912max. 512 Pixel UCS2903 / UCS2912max. 512 Pixel UCS9812 (8Bit controlled)max. 292 Pixel UCS9812 (16Bit controlled)max. 292 Pixel WS2811 / WS2812(B) / WS2813 / WS2815 / WS2818max. 512 Pixel   RGBW SK6812max. 384 Pixel TM1814max. 382 Pixel UCS2912max. 384 Pixel    Color sequence:RGB (adjustable) SingleColor red, green, blue, white RGBW with UCS2912, SK6812, TM1814  Pixel groups:1 - 127  Max. number of pixel:170 Pixel (RGB) 128 Pixel (RGBW) 512 Pixel (Single Color)  Dimensions:12mm x 25mm Product DownloadsMiniPixx RDMBedienungsanleitung MiniPixx RDMUser Manual
Product number: 90-3604

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€49.99*
DMX-Splitter 4
 DMX-Splitter 4The DMX-Splitter 4 is a compact DMX-Divider with one DMX-Input signal which providesthese at four galvanically isolated outputs.4 galvanically isolated outputsThe DMX-Splitter 4 is a compact DMX-Divider with one DMX-Input signal which providesthese at four galvanically isolated outputs.Extremely light constructionExtremely light DC/DC converters are used for galvanic isolation.Power supply via one power supply unitThe power supply occurs via one power supply unit.The voltage range is between 8V up to 24V.Compact design for top hat rail mountingThe DMX-Splitter 4 is suitable for installation in top hat rail mountingswith a width of 7cm due to its small size.LED-DisplayTwo LEDs show clearly the current operation mode.Top hat rail mounting availableSuitable for the DMX Splitter 4 the DIN rail housing 700 is available as accessory. Specifications  Power supply:8-24V DC (350mA@12V; 200mA@24V)  Input:512 channels  Output:4x 512 channels galvanically isolated  Connections:screw terminals  Dimensions:64,2mm x 82mm Product DownloadsDMX-Splitter 4Bedienungsanleitung DMX-Splitter 4User Manual
Product number: 90-0814

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€98.75*

Tools & Equipment:

WAGO 221-2411 Through Connector
 WAGO 221-2411 DurchgangsverbinderWith the 221 series connection terminal, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The connection terminals can be opened particularly easily and quickly.Thanks to the specially designed operating lever, only minimal effort is required to open the 221.The connection is made completely without tools.In addition, the recessed grips on the side prevent slipping and ensure that the terminal is easy to hold while connecting the conductors.With the small connection terminal up to 4 mm², all types of conductors with different cross-sections can be clamped quickly and easily.The 1-way through connectors connect fine-stranded conductors from 0.14 to 4 mm² as well as single and multi-wire conductors from 0.2 to 4 mm².The large connection area allows you to connect different types of conductors and bridge large differences in cross-section. Specifications  Number of poles:1  Rated current:32A  Cross section flexible (max.):4 mm²  Cross section flexible (min.):0.14 mm²  Cross section rigid (max.):4 mm²  Cross section rigid (max.):0.2 mm²  Part number:221-2411  Manufactor:WAGO
Product number: 00-0690

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€0.60*
WAGO 221-412 Connection Terminal 2
 WAGO 221-412 Verbindungsklemme 2With the 221 series connection terminal, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The connection terminals can be opened particularly easily and quickly.Thanks to the specially designed operating lever, only minimal effort is required to open the 221.The connection is made completely without tools.In addition, the recessed grips on the side prevent slipping and ensure that the terminal is easy to hold while connecting the conductors.With the small connection terminal up to 4 mm², all types of conductors with different cross-sections can be clamped quickly and easily.The connectors connect fine-stranded conductors from 0.14 to 4 mm² as well as single and multi-wire conductors from 0.2 to 4 mm².The large connection area allows you to connect different types of conductors and bridge large differences in cross-section. Specifications  Type:Connection terminal  Assembly:2 conductors  Rated current:32A  Cross section flexible (max.):4 mm²  Cross section flexible (min.):0.14 mm²  Cross section rigid (max.):4 mm²  Cross section rigid (max.):0.2 mm²  Part number:221-412  Manufactor:WAGO
Product number: 00-0691

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€0.89*
WAGO 221-412 Connection Terminal 3
 WAGO 221-413 Verbindungsklemme 3With the 221 series connection terminal, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The connection terminals can be opened particularly easily and quickly.Thanks to the specially designed operating lever, only minimal effort is required to open the 221.The connection is made completely without tools.In addition, the recessed grips on the side prevent slipping and ensure that the terminal is easy to hold while connecting the conductors.With the small connection terminal up to 4 mm², all types of conductors with different cross-sections can be clamped quickly and easily.The connectors connect fine-stranded conductors from 0.14 to 4 mm² as well as single and multi-wire conductors from 0.2 to 4 mm².The large connection area allows you to connect different types of conductors and bridge large differences in cross-section. Specifications  Type:Connection terminal  Assembly:3 conductors  Rated current:32A  Cross section flexible (max.):4 mm²  Cross section flexible (min.):0.14 mm²  Cross section rigid (max.):4 mm²  Cross section rigid (max.):0.2 mm²  Part number:221-413  Manufactor:WAGO
Product number: 00-0692

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€1.37*
WAGO 221-412 Connection Terminal 5
 WAGO 221-415 Verbindungsklemme 5With the 221 series connection terminal, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The connection terminals can be opened particularly easily and quickly.Thanks to the specially designed operating lever, only minimal effort is required to open the 221.The connection is made completely without tools.In addition, the recessed grips on the side prevent slipping and ensure that the terminal is easy to hold while connecting the conductors.With the small connection terminal up to 4 mm², all types of conductors with different cross-sections can be clamped quickly and easily.The connectors connect fine-stranded conductors from 0.14 to 4 mm² as well as single and multi-wire conductors from 0.2 to 4 mm².The large connection area allows you to connect different types of conductors and bridge large differences in cross-section. Specifications  Type:Connection terminal  Assembly:5 conductors  Rated current:32A  Cross section flexible (max.):4 mm²  Cross section flexible (min.):0.14 mm²  Cross section rigid (max.):4 mm²  Cross section rigid (max.):0.2 mm²  Part number:221-415  Manufactor:WAGO
Product number: 00-0693

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€1.67*
WAGO 221-500 Fastening Adapter
 WAGO 221-500 BefestigungsadapterWith the 221 series, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The mounting carrier is suitable for 2-, 3- and 5-conductor 221 Series Splicing Connectors (4 mm²). Specifications  Type:Mounting carrier  Suitable:for 2-, 3- and 5-conductor 221 Series Splicing Connectors  Mounting type:DIN-35 rail Screw mount  Color:Orange  Part number:221-500  Manufactor:WAGO
Product number: 00-0699

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€1.19*
Adam Hall DMX Cable (per meter)
 Adam Hall DMX-Kabel (Meterware)The Adam Hall 4 STAR D 234 is perfectly suited for transmission of DMX signals.Our classic with 2 x 0.34 mm² center conductor is also perfect for longer distances,thanks to its bigger cross-section. This highly flexible cable is easy to wind,and thanks to its larger diameter also very robust and therefore also well suitedfor hard road applications.- Adam Hall 4 Star "Standard" Series- Highly flexible, easy to reel- Good shielding thanks to dense copper spiral shielding- Larger inner conductor of 2 x 0.34 mm²- PVC jacket of 6.5 mm diameterDelivery as a section (yard goods) or 100m on a drum. Technische Daten  Type:DMX & AES/EBU Cable  Color:Black  Overall diameter:6,5 mm  AWG:22  Center conductor cross section:0,34mm²  Center conductor material:OFC  Number of internal conductors:2  Shield:Tin-plated copper braided shield  Line surge impedance:120 Ohm  Temperature range:-20 - +70°C  Application:DMX  Sales unit:Sold by the meter as a section or 100 meters on drum  Manufacturer:Adam Hall
Product number: 10-2400

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

From €1.99*

Power supply:

MEANWELL GST60A12-P1J (12V/5A/60W)
 MEANWELL GST60A12-P1J (12V/5A/60W)- Desktop Power Supply- Universal input- Protected against short circuit, overload, overvoltage- Insulation class I- Low idle power- Energy efficiency level VI (DOE)- Manufacturer: MEANWELL- Manufacturer description: GST60A12-P1J Specifications  Input voltage range:90...264V AC (47...63Hz) 135...370V DC  Inrush, max.:65A  Idle power, max.:0,075W  Operating temperature range:-30...+70°C  Cable length :1m  Input connector:C14 (EN60320-1)  Output connector:2,1x5,5mm  Weight:305g Desktop Switching Power Supply 12V/60W (5A)GST60ADatasheet
Product number: 50-0134

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€26.18*
MEANWELL HDR-15-12 (12V/1,25A/15W)
 MEANWELL HDR-15-12 (12V/1,25A/15W)- Small, staircase rail power supply, compact design, fanless design- Suitable for mounting on DIN standard mounting rails TS35/7 or TS35/15- Enclosed case, Touch-guard screw terminals - Universal input - Overload protection, current limiting, auto recovery - Protections: short circuit/over load/over voltage - Power-on LED display - Low no load power consumption - Manufactor: MEANWELL - Manufactor order code: HDR-15-12 Note:These power supplies are considered as a component that has to be installed in a final equipment. Specifications  Input Type:1-Phase / Single PhaseInput Voltage Range:85VAC to 264VAC | 120VDC to 370VDCFrequency Range:47~63HzOutput Voltage:12VDCOutput Current:0...1,25AOutput Power:15WOpen Frame/Enclosed:EnclosedIsolation Voltage:3kVrmsInrush Current max.:45ARated Output Power:110...145%Operating Temperature Range:-30°C to +70°CUnit Weight:78gLength/Width/Height:54.5mm/17.5mm/90mm Product DownloadsHDR-15Datasheet
Product number: 50-0121

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€22.99*
MEANWELL HLG-120H-12A (12V/10A/120W)
 MEANWELL HLG-120H-12A (12V/10A/120W)- Universal input- Aluminium enclosure_ Overload protection, current limiting, auto recovery_ Protections: short circuit/over load/over voltage- Built-in active PFC function- Suitable for LED lighting and moving sign applications- EN61000-3-2, Class C, EN55015, EN61347-1, EN61347-2-13- IP65- Adjustable output voltage with internal potentiometer- Adjustable output current with internal potentiometer- Manufactor: MEANWELL- Order code: HLG-120H-12A Specifications  Output voltage:12V (einstellbar: 10,8...13,5V)  Output current, max:10A (adjustable 5...10A)  Input voltage:90...264V AC (47...63Hz) 127...370V DC  Input Inrush Current, max.:60A  Operating Temperature:-40...+70°C  Weight:1120g Produkt DownloadsHLG-120HDatasheet
Product number: 50-0141

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€59.99*
MEANWELL HLG-240H-12A (12V/16A/192W)
 MEANWELL HLG-240H-12A (12V/16A/192W)- Universal input- Aluminium enclosure_ Overload protection, current limiting, auto recovery_ Protections: short circuit/over load/over voltage- Built-in active PFC function- Suitable for LED lighting and moving sign applications- EN61000-3-2, Class C, EN55015, EN61347-1, EN61347-2-13- IP65- Adjustable output voltage with internal potentiometer- Adjustable output current with internal potentiometer- Manufactor: MEANWELL- Order code: HLG-240H-12A Specifications  Output voltage:12V (adjustable: 11,2...12,8V)  Output current, max:16A (adjustable 8...16A)  Input voltage:90...305V AC (47...63Hz) 127...431V DC  Input Inrush Current, max.:75A  Over Current Protection:95...108%  Operating Temperature:-40...+70°C  Weight:1300g Produkt DownloadsHLG-240HDatasheet
Product number: 50-0142

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€66.64*
MEANWELL HLG-320H-12A (12V/22A/264W)
 MEANWELL HLG-320H-12A (12V/22A/264W)- Universal input- Aluminium enclosure_ Overload protection, current limiting, auto recovery_ Protections: short circuit/over load/over voltage- Built-in active PFC function- Suitable for LED lighting and moving sign applications- EN61000-3-2, Class C, EN55015, EN61347-1, EN61347-2-13- IP65- Adjustable output voltage with internal potentiometer- Adjustable output current with internal potentiometer- Manufactor: MEANWELL- Order code: HLG-320H-12A Specifications  Output voltage:12V (adjustable: 10,8...13,5V)  Output current, max:22A (adjustable 11...22A)  Input voltage:90...305V AC (47...63Hz) 127...431V DC  Input Inrush Current, max.:70A  Over Current Protection:95...108%  Operating Temperature:-40...+70°C  Weight:1880g Produkt DownloadsHLG-320HDatasheet
Product number: 50-0143

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€93.51*
MEANWELL HLG-600H-12A (12V/40A/480W)
 MEANWELL HLG-600H-12A (12V/40A/480W)- Universal input- Aluminium enclosure_ Overload protection, current limiting, auto recovery_ Protections: short circuit/over load/over voltage- Built-in active PFC function- Suitable for LED lighting and moving sign applications- EN61000-3-2, Class C, EN55015, EN61347-1, EN61347-2-13- IP65- Adjustable output voltage with internal potentiometer- Adjustable output current with internal potentiometer- Manufactor: MEANWELL- Order code: HLG-600H-12A Specifications  Output voltage:12V (adjustable: 10,2...12,6V)  Output current, max:40A (adjustable 20...40A)  Input voltage:90...305V AC (47...63Hz) 127...431V DC  Input Inrush Current, max.:70A  Over Current Protection:95...108%  Operating Temperature:-40...+70°C  Weight:3900g Produkt DownloadsHLG-600HDatasheet
Product number: 50-0144

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€209.99*
MEANWELL HLG-80H-12A (12V/5A/60W)
 MEANWELL HLG-80H-12A (12V/5A/60W)- Universal input- Aluminium enclosure_ Overload protection, current limiting, auto recovery_ Protections: short circuit/over load/over voltage- Built-in active PFC function- Suitable for LED lighting and moving sign applications- EN61000-3-2, Class C, EN55015, EN61347-1, EN61347-2-13- IP65- Adjustable output voltage with internal potentiometer- Adjustable output current with internal potentiometer- Manufactor: MEANWELL- Order code: HLG-80H-12A Specifications  Output voltage:12V (adjustable: 10,8...13,5V)  Output current, max:5A (adjustable 3...5A)  Input voltage:90...305V AC (47...63Hz) 127...431V DC  Input Inrush Current, max.:70A  Operating Temperature:-40...+70°C  Weight:840g Produkt DownloadsMEANWELL HLG-80HDatasheet
Product number: 50-0140

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€43.92*
MEANWELL RS-25-12 (12V/2,1A/25W)
 MEANWELL RS-25-12 (12V/2,1A/25W)- Enclosed case, screw terminals- Universal input- Overload protection, current limiting, auto recovery- Protections: short circuit/over load/over voltage- Long life 105°C electrolytic capacitors- Manufactor: MEANWELL- Manufactor order code: RS-25-12Note:These power supplies are considered as a component that has to be installed in a final equipment. Specifications  Output voltage:12V  Output current, max:2,1A (0...2,1A)  Input voltage:88...264V AC (47...63Hz) 125...373V DC  Input Inrush Current, max.:30A  Over Current Protection:110...180%  Operating Temperature:-20...+70°C  Weight:200g Produkt DownloadsRS-25Datasheet
Product number: 50-0301

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€14.28*
RECOM RAC05-12SK/C14 (12V/420mA)
 RECOM RAC05-12SK/C14 (12V/420mA)- Unique patented design- Isolated power supply with integrated mains filter- Packaged inside of line filter case- Safe, touchable DC outputs- Easy installation- Worldwide standard IEC input- 85-264VAC universal input voltage- Manufactor: RECOM- Manufactor order code: RAC05-12SK/C14 Specifications  Output voltage:12V  Output current, max:420mA (0...420mA)  Input voltage:85...264V AC (47...63Hz) 120...370V DC  Input Inrush Current, max.:30A  Operating Temperature:-25...+60°C  Weight:56g Produkt DownloadsDatasheetUser Manual
Product number: 50-0190

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€19.95*
SELF SLT75-12VFC-UN 12V/6,25A (75W)
 SELF SLT75-12VFC-UN 12V/6,25A (75W)- Independent power supply - Class I protection, SELV output - Constant voltage - IP67 - Protected against over load, short circuit, over voltage and over temperature - EN61347-1, EN61347-2-13, EN55015, EN61000-3-2 etc. - For LED lighting applications - Manufactor: SELF ELECTRONICS- Manufactor order code: SLT75-12VFC-UN Specifications  Output voltage:12V  Output current, max:6,25A (0...6,25A)  Input voltage:108...264V AC  Input Inrush Current, max.:21,2A  Operating Temperature:-25...+50°C  Weight:230g Produkt DownloadsDatasheetUser Manual
Product number: 50-0180

DMX4ALL GmbH - DMX-Technik Made in Germany
Delivery time: 1-3 days

€44.82*