DMX STAGE-PROFI 1.1 PoE (XLR5)

€299.62*

Content: 1 Stck.

9 at stock.

Das Versandversprechen gilt nur für Artikel, die im Online Shop als DMX4ALL GmbH - DMX und RDM-Technik Made in Germany

angezeigt werden und Zahlungseingang per PayPal vorrausgesetzt.
Versand nur werktags von Montag bis Freitag (bis 13:00 Uhr) (nicht am Samstag, Sonntag und Feiertag).

Delivery time: 1-3 days

Piece

Product number: 99-0475

Manufacturer: DMX4ALL GmbH

Manufacturer product number: 99-0475

Weight: 0.35 kg

Delivery time: 1-3 days

Our benefits

Direct from the manufacturer
dispatch within 24 hours
Made in Germany
technical support

Our payment methods:

Product information "DMX STAGE-PROFI 1.1 PoE (XLR5)"

DMX STAGE-PROFI 1.1 PoE (XLR5)

The DMX STAGE-PROFI 1.1 PoE is a compact Ethernet Interface (DMX via Ethernet), which
can be used for Art-Net™ / TPM2 / USB to DMX / sACN to DMX / RDM or DMX to Art-Net™.

Via a standard RJ45 net work connection the connection to ethernet net work occurs.

Switchable DMX direction
The DMX direction can be switched according to usage.

Settable DMX frame rate
In the DMX-OUTPUT mode the DMX frame rate is adjustable, so this interface is compatible to "slow" DMX devices.

RDM via Art-Net™
Supports RDM via Art-Net™ and thus enables connected PoE devices to be configured via Art-Net™ using corresponding software.

Disengageable LED display
The LED-Display at the DMX STAGE-PROFI 1.1 PoE is disengageable via Art-Net™-Command (AcLedMute)
or time controlled. This is very helpful to avoid disturbing “light points” on stage.

Easy Configuration
A user-friendly configuration via a web browser allows a fast and uncomplicated setting of all parameters.
No special software is required, a normal web browser is sufficient. Thus, the configuration at any time
from your PC, smartphone or tablet device.
For easy setting of the IP-address, we provide the IP Configurator as a PC tool or Android app available for free.
This allows you to leave the network settings unchanged and can easily configure the IP.

High quality and Compact Design
The DMX STAGE-PROFI 1.1 PoE is designed with a 3-pin Neutrik-XLR-Connection metal design and cased in an aluminium housing.

Art-Net™ Merge-Function
Two Art-Net™ sources are output by LTP (Latest) or HTP (Highest) combined to the DMX output.

Combinable with WiFi components
In combination with a WLAN bridge the DMX STAGE-PROFI 1.1 PoE can also be integrated into WLAN net works.

Firmware update function
To use future functions the DMX STAGE-PROFI 1.1 PoE offers a Firmware-Update-Function.
This can be started with any web browser, so no direct access to the device is necessary!

DMX4ALL Communication-Interface
The DMX STAGE-PROFI 1.1 PoE has an additional communication interface using the DMX4ALL-Commands via TCP or UDP packages.

Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd.

Specifications


Power supply:	PoE according to IEEE 802.af

	or 5V DC via attached external power supply
Connection:	RJ45 Ethernet
	USB Mini-B
	Neutrik® XLR3

Ethernet:	10 Mbit/s \| 100 Mbit/s
	DHCP
	PoE

DMX:	Selectable:
	- 512 channels OUT
	- 512 channels IN

DMX-Framerate:	Adjustable (5 - 44 fps)

RDM:	RDM via Art-Net™ (switchable on/off)

ArtDmx Fail:	HOLD last data
(DMX-OUT)	CLEAR all to 0%
	SET all to 100%
	NO OUTPUT
	DEFAULT VALUES
	INTERNAL PROGRAM

DMX Fail:	HOLD last data
(DMX-IN)	CLEAR all to 0%
	SET all to 100%
	NO OUTPUT
	DEFAULT VALUES

Protocol:	Art-Net™ (downwards compatiblel)
	Ethernet-VCP (Virtual COM Port)
	USB-VCP (Virtual COM Port)
	TPM2
	sACN (Unicast)
	DMX4ALL-Commands via TCP, UDP, VCP

Internal programs:	User-configurable stand-alone programs

Status LED:	Green: Ethernet Connection
	Yellow: Datatransfer

Dimensions:	75mm x 26mm x 35 mm

Produkt Downloads

DMX STAGE-PROFI 1.1 PoE
Bedienungsanleitung
DMX STAGE-PROFI 1.1 PoE
User Manual
DMX STAGE-PROFI 1.1 PoE
Ethernet VCP Driver 32 & 64bit - Version 1.10
DMX STAGE-PROFI 1.1 PoE
USB VCP Driver 32 & 64bit - Version 42.0.1.0
DMX STAGE-PROFI 1.1 PoE
Firmware

Software & Tools

DMX-Configurator V2
Windows 32 & 64bit
DMX-Configurator V2
Bedienungsanleitung
DMX-Configurator V2
User Manual
IP Configurator (ArtNet Produkte)
Windows 32 & 64bit
IP Configurator
Anwendungshinweis
IP Configurator
Application Note

Manufacturer "DMX4ALL GmbH"

Wir bieten
professional space with a human face

Die DMX4ALL GmbH ist ein Ingenieurbüro mit dem Produktschwerpunkt der Licht- und Steuerungs- technik basierend auf dem ARTNET,DMX512 und RDM Protokoll. Der Familienbetrieb entwickelt und produziert seit 2004 elektronische Schaltungen für Clubs, Bühne und Beleuchtung. Die Produktpalette ist mit den Bedürfnissen der Kunden gewachsen und reicht heute vom einfachen DMX-Dekoder über verschiedene Abspieler und ArtNet PoE Interfaces bis hin zu modernen LED-Dimmern Stepper und innovativen LED Pixel-Kontrollern.

You might also be interested in:

DMX-RELAIS 8 INRUSH

DMX-RELAIS 8 INRUSHThe DMX-RELAIS 8 INRUSH is designed for several control tasks.8 potential free switching outputsThe DMX-RELAIS 8 INRUSH has 8 potential free switching outputs (closer / NO) up to 8A switching capacity.Switching contact for direct and alternating voltageThe relay interface is suitable to direct voltage (DC) or alternating voltage (AC).DMX FAIL-FunctionAn adjustable DMX FAIL function offers the option to hold the current state (HOLD)or to adopt a predefined value if the DMX signal fails.RDM supportThe DMX-RELAIS 8 INRUSH allows the configuration via RDM or DMX.Free RDM softwareFor setting the parameters via RDM, our free RDM Configurator softwareis available for download on our website www.dmx4all.de.Lockable device settingsThe RDM parameters Lock Pin and Lock State allow or prohibit changingsaved RDM parameters to prevent unauthorized changes.SubDevice-ModeIn SubDevice mode, each output is assigned its own DMX address,operating mode and DMX FAIL behavior via RDM.LED-State DisplayThe DMX state is indicated via the LED status.Several operation modesThe DMX-RELAIS 8 INRUSH offers several operating modes which can be set via RDM:- Hysteresis 127/128- Hysteresis 0/1- Hysteresis 100/150- Exclusive- Monostable 1SecondTop hat rail mounting availableSuitable for the DMX-RELAIS 8 INRUSH the DIN rail housing 1050 is available as accessory.Together with the top-hat rail housing 1050, the interface is optimally suited for control cabinet installation. Specifications Power supply:12-24V DC (280mA @ 12V / 180mA @ 24V) Protocol:DMX512 RDM DMX-Channels:8 DMX-channels DMX-FAIL:Hold / 0-100% Operation modes:Hysteresis 127/128 Hysteresis 0/1 Hysteresis 100/150 Exclusive Monostable 1Second Output:8 potential-free switching output (closer / NO) each max. 8A 165A@20ms Switch-on peak current Connectors:screw terminals Dimensions:99mm x 82mm Product DownloadsDMX-RELAIS 8 INRUSHBedienungsanleitung DMX-RELAIS 8 INRUSHUser Manual

Product number: 90-2008

Delivery time: 1-3 days

€145.95*

DMX-Analog 0-10V 8 channel

DMX-Analog 0-10V 8-KanalThe DMX 0-10V Interface is especially designed to switch not-DMX-suitable devices with an analog input.On the output 8 analog signals with 0-10V output voltage are available.Each output is controllable via a DMX-channel and divided in 256 steps.A output driver on each channel allows loads up to 10mA. Specifications Power supply:12-24V DC Current consumption:50mA@12V; 40mA@24V (without connected load) Protocol:DMX512 RDM DMX channels:8 channels DMX-FAILHold / 0-100% Output:8 outputs with driver each max. 10mA Resolution:256 steps (8-Bit), linear Connections:screw terminals Dimensions:64mm x 82 mm Product DownloadsDMX-Analog 0-10V 8-KanalBedienungsanleitung DMX-Analog 0-10V 8 channelUser Manual

Product number: 90-3908

Delivery time: 1-3 days

€98.49*

DMX-LED-Dimmer X9

DMX-LED-Dimmer X9The DMX-LED-Dimmer X9 is especially designed for controlling RGB LED-Stripes.The dimmer has 9 PWM-Outputs (3xRGB) independently controllable via DMX.9 OutputsThe DMX-LED-Dimmer X9 has 9 outputs to which LEDs can be connected.All outputs are designed in the same way so single color, RGB or RGBW LEDs can be connected.High Power OutputsThe outputs can drive a current up to 10A.So it is possible to connect a maximum load of 120W (12V) / 240W (24V)0% bis 100% dimmableThe connected LEDs are dimmed by PWM from 0% to 100%.For voltages from 12V up to 24VThe DMX-LED-Dimmer X9 operates with supply voltages from 12V up to 24V. The LED voltage canbe different per output so that one DMX-LED-Dimmer X9 can control different LED systems.DMX-FAIL FunctionAn adjustable DMX FAIL function offers the option to get in case of lostDMX signal the current state (HOLD) or assuming a preset value.RDM supportThe DMX-LED-Dimmer X9 allows configuration by RDM via DMX.LED-State DisplayThe DMX state is indicated via the LED status.Stand-Alone FunctionAs an alternative to DMX control, internal color sequences can be called upvia the address switch without external DMX control.Top hat rail housing availableThe top-hat rail housing 1050 is available as accessory for the DMX-LED-Dimmer X9. Specifications Power supply:7-24V DC 80mA@12V / 100mA@24V (without connected LED load) LED voltage:7-24V DC (no AC voltage !) Protocol:DMX512 RDM DMX channels:9 channels with 8Bit-controlling DMX-FAIL:Hold / 0%-100% Output:9 PWM-signal with 8Bit-resolution Common supply voltage Output current:max. 10A each output In sum 90A with all GND connections Output power:9x 120W (12V) / 9x 240W (24V) PWM-Frequency:244 Hz Energy-Save output:Control output for switching off the load power supply units StandAlone function:9 internal StandAlone programs Connections:Screw terminals Dimensions:99mm x 82 mm Product DownloadsDMX-LED-Dimmer X9Bedienungsanleitung DMX-LED-Dimmer X9User Manual

Product number: 90-3309

Delivery time: 1-3 days

€113.05*

DMX-Splitter 4 RDM

DMX-Splitter 4 RDMThe DMX-Splitter 4 RDM is a compact DMX and RDM distributor that makes a DMX input signalavailable again at four galvanically isolated outputs.4 galvanically isolated outputsThe DMX-Splitter 4 RDM is a compact DMX and RDM distributor that makes a DMX input signalavailable again at four galvanically isolated outputs.DMX and RDMIn contrast to pure DMX splitters, the RDM information is passed in bothdirections in addition to the DMX signal.RDM filterWhen the RDM filter is switched on, all RDM information are filtered out and no longer passedon to the outputs. This can prevent malfunction / flickering of non-RDM-capable devices.Settings possible via RDMThe DMX-Splitter 4 RDM is recognized as an independent RDM device and settings can be made via RDM.Extremely light constructionExtremely light DC/DC converters are used for galvanic isolation.Power supply via one power supply unitThe power supply occurs via one power supply unit. The voltage range is between 8V up to 24V.RGB-LED-DisplayThree RGB LEDs clearly indicate the current operating status.Top hat rail mounting availableSuitable for the DMX-Splitter 4 RDM the DIN rail housing 700 is available as accessory. Specifications Power supply:8-24V DC Power consumption:200mA@12V / 130mA@24V (no load) Protocol:DMX512 RDM Output:4x DMX512 / RDM galvanically isolated RDM filter:Can be switched on / off Connections:screw terminals Dimensions:64,2mm x 82mm Product DownloadsDMX-Splitter 4 RDMBedienungsanleitung DMX-Splitter 4 RDMUser Manual

Product number: 90-0824

Delivery time: 1-3 days

€154.70*

DMX-Splitter 4 RDM+

DMX-Splitter 4 RDM+The DMX-Splitter 4 RDM+ is a compact DMX and RDM distributor that makes a DMX input signalavailable again at four galvanically isolated outputs.4 galvanically isolated outputsThe DMX-Splitter 4 RDM+ is a compact DMX and RDM distributor that makes a DMX input signalavailable again at four galvanically isolated outputs.DMX and RDMIn contrast to pure DMX splitters, the RDM information is passed in bothdirections in addition to the DMX signal.RDM filterWhen the RDM filter is switched on, all RDM information are filtered out and no longer passedon to the outputs. This can prevent malfunction / flickering of non-RDM-capable devices.Settings possible via RDMThe DMX-Splitter 4 RDM is recognized as an independent RDM device and settings can be made via RDM.Extremely light constructionExtremely light DC/DC converters are used for galvanic isolation.Power supply via one power supply unitThe power supply occurs via one power supply unit. The voltage range is between 8V up to 24V.3 RGB-LEDsThree RGB LEDs clearly indicate the current operating status.Touch-ControlThe DMX-Splitter 4 RDM+ has an integrated touch control field to turn on/off the RDM filter. Switchable LED-DisplayThe LED-Display at the DMX-Splitter 4 RDM+ can be switched off via RDM command or time-controlled,so that no disturbing light sources are present during operation. Specifications Power supply:8-24V DC Power consumption:200mA@12V / 130mA@24V (no load) Protocol:DMX512 RDM Input:1x DMX512 / RDM Output:4x DMX512 / RDM galvanically isolated RDM filter:Can be switched on / off TOUCH-Control:1 sensor button directly on the device and 3 RGB status LEDs Connections:screw terminals Dimensions:70mm x 90mm x 60mm Product DownloadsDMX-Splitter 4 RDM+Bedienungsanleitung DMX-Splitter 4 RDM+User Manual

Product number: 99-0824

Delivery time: 1-3 days

€227.05*

Tools & Equipment:

Ethernet cable 0,5m

Netzwerkkabel 0,5m- shielded LAN/network cable to connect network components with 2 x RJ45 connectors- outer shield: foil screening- with 3µ gold plated PINs- with length indication on the slimline strain relief- with latch protection- pair-sequence acc. to EIA/TIA 568B Specifications Specification:CAT 5e Connector:RJ45 male (8P8C), both sides Kink protection:both sides Length:0,5m Color:black

Product number: 10-3000

Delivery time: 1-3 days

€1.89*

Ethernet cable 10m

Netzwerkkabel 10m- shielded LAN/network cable to connect network components with 2 x RJ45 connectors- outer shield: foil screening- with 3µ gold plated PINs- with length indication on the slimline strain relief- with latch protection- pair-sequence acc. to EIA/TIA 568B Specifications Specification:CAT 5e Connector:RJ45 male (8P8C), both sides Kink protection:both sides Length:10m Color:black

Product number: 10-3010

Delivery time: 1-3 days

€4.99*

RJ45 Ethernet cable 1m

Netzwerkkabel 1m- shielded LAN/network cable to connect network components with 2 x RJ45 connectors- outer shield: foil screening- with 3µ gold plated PINs- with length indication on the slimline strain relief- with latch protection- pair-sequence acc. to EIA/TIA 568B Specifications Specification:CAT 5e Connector:RJ45 male (8P8C), both sides Kink protection:both sides Length:1m Color:black

Product number: 10-3001

Delivery time: 1-3 days

€2.99*

Ethernet cable 30m

Netzwerkkabel 30m- shielded LAN/network cable to connect network components with 2 x RJ45 connectors- outer shield: foil screening- with 3µ gold plated PINs- with length indication on the slimline strain relief- with latch protection- pair-sequence acc. to EIA/TIA 568B Specifications Specification:CAT 5e Connector:RJ45 male (8P8C), both sides Kink protection:both sides Length:30m Color:black

Product number: 10-3030

Delivery time: 1-3 days

€24.95*

RJ45 Ethernet cable 5m

RJ45 Netzwerkkabel 5m- shielded LAN/network cable to connect network components with 2 x RJ45 connectors- outer shield: foil screening- with 3µ gold plated PINs- with length indication on the slimline strain relief- with latch protection- pair-sequence acc. to EIA/TIA 568B Specifications Specification:CAT 5e Connector:RJ45 male (8P8C), both sides Kink protection:both sides Length:5m Color:black

Product number: 10-3005

Delivery time: 1-3 days

€4.76*

Software:

DMX-Configurator FREE-Version

DMX-Configurator FREE-VersionThe controlling software DMX-Configurator 4PIXX represents a user friendly surface to create light scenes (programs). Up to 8 DMX-universes can be used which can be represented as pixel-matrix.A live operation with a connected DMX4ALL DMX- or Pixel-Interfaces will be possible as well as an export to DMX4ALL DMX-Player and SD-Card-Player. All in all, in many areas an application will be possible.The FREE-Version is available as download for free and has the following functions.Range of function:1 DMX OUT universeArtNet SupportCue-ListRecord FunctionArtNet Sync RecordingLoop Find FunctionDevice Manager to create LED-Pixel screensPreview for LED-Pixel screensRemote Manager (MIDI / TIMER / DMX)Secutity functions: Password protected programming fileExport/Import of scenesExport/Import of stepsExport for NanoSD Player / ArtNet-Player 4 / DMX-Player S/L/ONELimits of FREE-Version:Multi Interface Support with 16 DMX universes can be used with up to 2 scenesTOUCH-Mode (Time limited)No secutity functionsNo hardware secutity functions ArtNet Player 4 Operating system:Windows® 7, Windows® 8 Software-Updates:Available as download Produkt DownloadsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual Application NotesAufnahme von Art-NetAppNote Importieren von Jinx! SzenenAppNote Aufnahme eines DMX SignalsAppNote

Product number: 70-0122

Delivery time: 1-3 days

€0.00*

Details

DMX-Configurator PRO-Version

DMX-Configurator PRO-VersionThe controlling software DMX-Configurator represents a user friendly surface to create light scenes (programs). Up to 16 DMX-universes can be used which can be represented as pixel-matrix. A live operationwith a connected DMX4ALL DMX- or Pixel-Interfaces will be possible as well as an export toDMX-Player and SD-Card-Player. All in all, in many areas an application will be possible. The BASIC-Version use a USB-Dongle needing a free USB-slot. The Dongle can be used on several computer and is easy usable for service tasks. Range of functions:16 DMX OUT + 16 DMX-IN universesMulti Interface SupportCuelistArtNet SupportRecord FunctionArtNet Sync RecordingLoop Find FunctionDevice Manager to generate LED-Pixel for lines and screensPreview for LED-Pixel for lines and screensTOUCH-ModeRemote Manager (MIDI / TIMER / DMX)Export/Import of scenesExport/Import of stepsExport for AvengerSD / NanoSD Player / ArtNet-Player 4 / ArtNet MultiPixxPlyer 16 / DMX-Player S/L/ONESecurity functions: Optional password for programming fileHardware secutity functions: Program execution can be limited by using the hardware serial number Important InformationPlease note that the software is excluded from change and return ! ArtNet Player 4 Operating system:Windows® 7, Windows® 8, Windows® 10 PC-connections:USB 1.1 / USB 2.0 Scope of delivery:USB-Dongle with PRO-Licence DMX4ALL lanyard with dongle holder Software-Updates:Available as download Produkt DownloadsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual DMX-Configurator PRO-VersionUSB Driver Application NotesAufnahme von Art-NetAppNote Importieren von Jinx! SzenenAppNote Aufnahme eines DMX SignalsAppNote

Product number: 70-0123

Delivery time: 1-3 days

€299.00*